12151 (12-151) by Midland | Inverted Flare Fitting | Towed Trailer Brake | 1/4″ x 1/4″ x 1/4″ Inverted Flare (Ref # 7898) | Tee | Brass

(3 customer reviews)

$22.34 $17.87

Applications: Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared. SAE Rating: N/A Conformance: Meets specifications and standards o

Zero-Risk Assurance: Full-Refund Policy
Free Delivery on 30+ Orders
60-Day Hassle-Free Returns

SKU:UIW6879279502
Category: Adapters and More

Introduction

Applications:	Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas.	Used With:	Copper, brass, aluminum and steel hydraulic tubing that can be flared.
SAE Rating:	N/A	Conformance:	Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
Vibration:	Excellent resistance.	Temperature Range:	-65F to +250F (-53C to +121C) range at maximum operating pressures.
Advantages:	Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends.	Tolerance:	+/- .03 on all dimensions.

Working Pressure Ranges:
Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73F with copper tubing:
Assembly Instructions:
1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square. 2) Slide nut on tube. Threaded end “A” of nut must face out. 3) Flare end of tube with a 450 flaring tool. A) Measure flare diameter B) Examine flare for excessive thin out. C) On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares. 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.


Tube OD	1/8″	3/16″	1/4″	5/16″	3/8″	7/16″	1/2″	5/8″	3/4″	7/8″	1″
Thread OD (Threads per inch)	5/16-28	3/8-24	7/16-24	1/2-20	5/8-18	11/16-18	3/4-18	7/8-18	1-1/16-16	1-3/16-16	1-5/16-16

Standard Metric Threads:
Description Tube Size	Thread OD	Crest (Pitch)	Thread Description
Japanese 3/16″	10mm	1.0mm	M10 x 1.0
European 3/16″	10mm	1.0mm	M10 x 1.0
GM 6mm	12mm	1.0mm	M12 x 1.0
Fuel 5/16″	14mm	1.5mm	M14 x 1.5
Fuel 3/8″	16mm	1.5mm	M16 x 1.5
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.

Crossover Series:
127BT


Part Number	A	B	C	Reference	Approx. Weight (Lbs.)
12147 (12-147)	3/16″ 0.57″	3/16″ 0.76″	3/16″ 0.42″	7900	0.08
12145 (12-145)	3/16″ (1/2-20) 0.68″	3/16″ (3/8-24) 0.94″	3/16″ (1/2-20) 0.47″	7906	0.17
12148 (12-148)	3/16″ (9/16-18)	3/16″ (3/8-24)	3/16″ (9/16-18)	7933	0.10
12144 (12-144)	3/16″ (9/16-20) 0.82″	3/16″ (3/8-24) 0.94″	3/16″ (9/16-20) 0.47″	7905	0.18
12146 (12-146)	3/16″ (7/16-24) 0.54″	3/16″ (3/8-24) 0.78″	1/4″ (7/16-24) 0.42″	7914	0.08
12150 (12-144)	1/4″ 0.56	3/16″ 0.77	1/4″ 0.43	7901	0.10
12149 (12-149)	1/4″ (9/16-18) 0.81″	3/16″ (3/8-24) 0.93″	1/4″ (9/16-18) 0.50″	7904	0.10
12151 (12-151)	1/4″ 0.56″	1/4″ 0.77″	1/4″ 0.43″	7898	0.12

Shipping Info

Standard Shipping

Cost: $25

Free Shipping

We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.

Delivery Time:

It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.

Reviews

There are no reviews yet.

12151 (12-151) by Midland | Inverted Flare Fitting | Towed Trailer Brake | 1/4″ x 1/4″ x 1/4″ Inverted Flare (Ref # 7898) | Tee | Brass

$22.34 $17.87

Introduction

Shipping Info

Reviews

Related products