10157 by Midland | SAE 45 Flare Fitting | Union Forged | 1/8″ Male SAE 45 Flare | Tee | Brass

(3 customer reviews)

$10.57 $8.46

SPECIFICATIONS Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared. SAE Rating: SAE# 010401 C

Zero-Risk Assurance: Full-Refund Policy
Free Delivery on 30+ Orders
60-Day Hassle-Free Returns

SKU:UIW6879291875
Category: Adapters

Introduction

SPECIFICATIONS

Applications:	LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems.	Used With:	Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating:	SAE# 010401	Conformance:	Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration:	Good resistance – use long nut when greater vibration resistance is required.	Temperature Range:	-65F to +250F (-53C to +121C) range at maximum operating pressures
Tolerance:	+/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical.	Lead Free:	Not Lead Free

Working Pressure Ranges:
Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square. 2) Slide nut on tube. Threaded end “A” of nut must face out. 3) Flare end of tube with a 450 flaring tool. A) Measure flare diameter B) Examine flare for excessive thin out. 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight. 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn. Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.


Tube OD	1/8″	3/16″	1/4″	5/16″	3/8″	7/16″	1/2″	5/8″	3/4″
Thread Size B	5/16-24	3/8-24	7/16-20	1/2-20	5/8-18	11/16-16	3/4-16	7/8-14	1-1/16-14

Crossover Series:
44F	404	244	244F	T2	144F


Part Number	Male SAE 45 Flare	A	Body Size	Approx. Weight (Lbs.)
10157 (10-157)	1/8″	0.67″	0.36″	0.04
10158 (10-158)	3/16″	0.75″	0.36″	0.06
10159 (10-159)	1/4″	0.78″	0.36″	0.06
10160 (10-160)	5/16″	0.91″	0.44″	0.10
10161 (10-161)	3/8″	1.00″	0.44″	0.12
10162 (10-162)	1/2″	1.16″	0.59″	0.19
10163 (10-163)	5/8″	1.41″	0.69″	0.30
10164 (10-164)	3/4″	1.64″	0.88″	0.53
10165 (10-165)	7/8″	1.75″	1.25″	0.93

Shipping Info

Standard Shipping

Cost: $25

Free Shipping

We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.

Delivery Time:

It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.

Reviews

There are no reviews yet.

10157 by Midland | SAE 45 Flare Fitting | Union Forged | 1/8″ Male SAE 45 Flare | Tee | Brass

$10.57 $8.46

Introduction

Shipping Info

Reviews

Related products