12023 by Midland | Inverted Flare Fitting | Union Internal | 3/16″ Female Inverted Flare x 3/16″ Female Inverted Flare | Brass

Name: 12023 by Midland | Inverted Flare Fitting | Union Internal | 3/16" Female Inverted Flare x 3/16" Female Inverted Flare | Brass
SKU: UIW6879291606
Availability: InStock

(3 customer reviews)

$16.27 $13.02

SPECIFICATIONS Applications: Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared. SAE Rating: SAE# 040101 Conformance: Meets specifi

Zero-Risk Assurance: Full-Refund Policy
Free Delivery on 30+ Orders
60-Day Hassle-Free Returns

SKU:UIW6879291606
Category: Adapters

Introduction

SPECIFICATIONS

Applications:	Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas.	Used With:	Copper, brass, aluminum and steel hydraulic tubing that can be flared.
SAE Rating:	SAE# 040101	Conformance:	Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
Vibration:	Excellent resistance.	Temperature Range:	-65F to +250F (-53C to +121C) range at maximum operating pressures.
Advantages:	Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends.	Tolerance:	+/- .03 on all dimensions.

Working Pressure Ranges:
Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73F with copper tubing:
Assembly Instructions:
1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square. 2) Slide nut on tube. Threaded end “A” of nut must face out. 3) Flare end of tube with a 450 flaring tool. A) Measure flare diameter B) Examine flare for excessive thin out. C) On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares. 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.


Tube OD	1/8″	3/16″	1/4″	5/16″	3/8″	7/16″	1/2″	5/8″	3/4″	7/8″	1″
Thread OD (Threads per inch)	5/16-28	3/8-24	7/16-24	1/2-20	5/8-18	11/16-18	3/4-18	7/8-18	1-1/16-16	1-3/16-16	1-5/16-16

Standard Metric Threads:
Description Tube Size	Thread OD	Crest (Pitch)	Thread Description
Japanese 3/16″	10mm	1.0mm	M10 x 1.0
European 3/16″	10mm	1.0mm	M10 x 1.0
GM 6mm	12mm	1.0mm	M12 x 1.0
Fuel 5/16″	14mm	1.5mm	M14 x 1.5
Fuel 3/8″	16mm	1.5mm	M16 x 1.5
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.

Crossover Series:
421F	421N	302	2300	42IFHD


Part Number	Female Inverted Flare x Female Inverted Flare	A	Hex	Approx. Weight (Lbs.)
12022 (12-022)	1/8″	0.59″	0.40″	0.02
12023 (12-023)	3/16″	0.62″	0.43″	0.02
12024 (12-024)	1/4″	0.62″	0.50″	0.03
12025 (12-025)	5/16″	0.70″	0.56″	0.04
12026 (12-026)	3/8″	0.80″	0.75″	0.08
12027 (12-027)	1/2″	0.91″	0.90″	0.10
12028	5/8″	1.31″	1.06″	0.22

Shipping Info

Standard Shipping

Cost: $25

Free Shipping

We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.

Delivery Time:

It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.

Reviews

There are no reviews yet.

Be the first to review “12023 by Midland | Inverted Flare Fitting | Union Internal | 3/16″ Female Inverted Flare x 3/16″ Female Inverted Flare | Brass”

12023 by Midland | Inverted Flare Fitting | Union Internal | 3/16″ Female Inverted Flare x 3/16″ Female Inverted Flare | Brass

$16.27 $13.02

Introduction

Shipping Info

Reviews

Related products